The Skinner-Seal Saddle Tee is particularly recommended for installing garden gas lights, gas grills, automatic home laundries, and other appliances. It takes the place of a tee, union and nipple in one fixture. No pipe cutting or threading is necessary. The "cutting in" of ordinary tees is sometimes extremely difficult. With the Skinner-Seal Saddle Tee, the job becomes fast and simple- installation costs are substantially reduced.

Use of our Saddle Tee frequently saves installing a long run of pipe or tubing as connections to the pipe can often be made closer to the appliance.

The Saddle Tee is made of galvanized, nodular iron with a Buna-N gasket.* The single heavy steel bolt is plated.

*Some Saddle Tees assembled before Jan. 1, 2003, may have other gasket material.

1. Thoroughly clean the area with a wire brush where the Saddle Tee will be installed. This will help insure a bubble tight gasket seal.
2. Place the Saddle Tee in the position chosen, and tighten the bolt to the proper torque.
3. Make the service line connection with the method chosen, eg. drilling device, etc.
4. Pressure test the completed installation for leaks.
5. Check for leaks before leaving.